edelbrock carb
Thread Starter
|
Junior User
Joined: Jul 2003
Posts: 54
Likes: 1
From: c,c tx
edelbrock carb
hi, i'm looking to buy a edelbrock #1411 do i need both the edl-1495 and edl-1483. the truck is a 1986 f250 4x4 460 engine 4 speed manual the intake is the performer 460 2166 everything is stock but not the intake. 
my old carb is leaking gas 
thanks
mike
my old carb is leaking gas thanks
mike
Senior User
Joined: Dec 2004
Posts: 107
Likes: 0
From: NE TN
Mike,
According to Edelbrock's website you do need both. I am running the same intake manifold but with a Edelbrock #1406 600 CFM Carb on a 1985 F250 7.5L 460 Dually Flatbed. So far I have not had any problems. I might switch to a #1411 for the extra CFM'S when I start towing my RV. Make sure you pressure test your fuel pump and install a fuel pressure regulator if you put out more than 5.5 PSI. I have spoken to Edelbrocks tech support on the phone and they are great people. I was missing a Step-up piston and a metering rod out of my #1406 and they sent me one free of charge. They are a class outfit.
Go to www.edelbrock.com for their phone #'s.
According to Edelbrock's website you do need both. I am running the same intake manifold but with a Edelbrock #1406 600 CFM Carb on a 1985 F250 7.5L 460 Dually Flatbed. So far I have not had any problems. I might switch to a #1411 for the extra CFM'S when I start towing my RV. Make sure you pressure test your fuel pump and install a fuel pressure regulator if you put out more than 5.5 PSI. I have spoken to Edelbrocks tech support on the phone and they are great people. I was missing a Step-up piston and a metering rod out of my #1406 and they sent me one free of charge. They are a class outfit.
Go to www.edelbrock.com for their phone #'s.
Thread Starter
|
Junior User
Joined: Jul 2003
Posts: 54
Likes: 1
From: c,c tx
hi, i bought the 1411 it will be here friday someone had them on ebay brandnew for $255 shipped so i just had to pick one up. edelbrock told me to buy the 1411 i may add their cyclinder heads and a cam down the road i also order the edl-1495 and edl-1483 but they wont be here til monday.
Thread
Thread Starter
Forum
Replies
Last Post
tartar_sammich
1961 - 1966 F-100 & Larger F-Series Trucks
22
Mar 30, 2023 02:36 PM
flowney
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
2
Oct 17, 2016 05:01 PM
bigwalt1
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
7
Jul 16, 2014 08:14 PM
