Parts source for camshaft position sensor
Thread Starter
|
Senior User
Joined: Aug 2000
Posts: 407
Likes: 0
Parts source for camshaft position sensor
The drive gear, or synchronizer as it is sometimes called, for the camshaft position sensor needs to be replaced on my `95 Explorer w/ 4.0 pushrod motor. I can only find the entire assembly, drive gear and sensor, available at about $425 through the stealer and even more at my local Advance Auto Parts store. Has anyone found it cheaper elsewhere or just the drive gear so that I don’t have to waste money on a sensor that is not bad (yet).
Many thanks,
Mark
Many thanks,
Mark
Elder User
Joined: Jan 2002
Posts: 692
Likes: 0
Post Fiend
Joined: Jan 2003
Posts: 9,748
Likes: 16
From: Connecticut
Funny how for some years the 4.0L OHV application has the cam synchronizer and sensor as one integral unit, and for other years they are seperate components.
Anyway, try looking up Napa Part # ECHCSS511 (for around $275).
Anyway, try looking up Napa Part # ECHCSS511 (for around $275).
Thread
Thread Starter
Forum
Replies
Last Post
