Head guide?
Thread Starter
|
Elder User
Joined: Jan 2004
Posts: 887
Likes: 0
From: Colorado
Head guide?
Tried searches, cant find anything relevant....Anyone know of a good web-site, or book for information on head swaps? have a 302, want to throw some 3511w heads on it if i come across any, and just want to know a little more information about it all before i do it...Any help is appreciated..Also, any good member sites, or reference sites for ford small blocks around?
--JB
--JB
Postmaster
Joined: Jun 2001
Posts: 4,496
Likes: 0
Food for thought, Most of the performance oriented heads that were put on the 351w's were also put on the 302's, actually the 302 one upped the 351w when they put the gt40P heads on them. What year engine are you working on? Are you wanting aftermarket or stock cylinder heads?
Thread Starter
|
Elder User
Joined: Jan 2004
Posts: 887
Likes: 0
From: Colorado
Thanks for the stang link Mustang..ill have to look, got a few stangs in town anyways...
The motor is a swap....havent looked for casting numbers yet, but should be a 68-74 motor in it....Trying to find some stock heads that i could port n polish, slap on a stock 302 bottom end, and throw a little 144 blower on it, pushing only 3 lbs of boost for regular driving during the summer, and strip racing in a 3000 pound vehicle...i learned alot about the 400 with my 79, time to learn about small blocks, then fe, then big blocks. Thanks again for the responses
--JB
The motor is a swap....havent looked for casting numbers yet, but should be a 68-74 motor in it....Trying to find some stock heads that i could port n polish, slap on a stock 302 bottom end, and throw a little 144 blower on it, pushing only 3 lbs of boost for regular driving during the summer, and strip racing in a 3000 pound vehicle...i learned alot about the 400 with my 79, time to learn about small blocks, then fe, then big blocks. Thanks again for the responses
--JB
Postmaster
Joined: Jun 2001
Posts: 4,496
Likes: 0
Actually the gt-40 (put on some 302 and 351w's) and gt-40p (only put on 302 explorer/mountaineers), flow better than the 69-70 351w heads, on the intake and exhaust, small amount but its better.
Last edited by jwtaylor; Nov 11, 2004 at 04:07 PM.
Posting Guru
Joined: Jan 2003
Posts: 1,061
Likes: 0
From: Still under the hood in O
Trending Topics
Thread Starter
|
Elder User
Joined: Jan 2004
Posts: 887
Likes: 0
From: Colorado
Thanks for the input...im wanting to learn the basics about porting and polishing...so i might buy a bare set of heads, or pull a complete set off a 302 at a salvage yard, and try to learn...ofcourse, if there is a casting number that is a better head, id want those...but im not sure if there is or not...Thanks again for the info, links, and input.
--JB
--JB
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Postmaster
Joined: Jun 2001
Posts: 4,496
Likes: 0
Well if you wanna get up to speed on home porting:
http://www.cmc.net/~xero/mouseporting.html
http://www.workmonster.com/id17.htm
http://www.ottawa-vdubbing.com/info/...s/headporting/
http://www.cmc.net/~xero/mouseporting.html
http://www.workmonster.com/id17.htm
http://www.ottawa-vdubbing.com/info/...s/headporting/
Last edited by jwtaylor; Nov 12, 2004 at 06:29 AM.
Thread
Thread Starter
Forum
Replies
Last Post
crm318
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
49
Jul 24, 2023 11:05 PM
klatt_89
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
22
Jan 12, 2006 02:05 PM
