Looking for Info
Thread Starter
|
New User
Joined: Nov 2004
Posts: 1
Likes: 0
Looking for Info
I own a 99 Ranger and the four wheel drive has not worked properly lately. I have had the vaccum seal hubs replaced as I was told this was the problem. It works for a while and then does not. I am not a big fan of the vacuum seal hubs as of know.........I am thinking of converting to manual lock out hubs and my question is: do they make this conversion kit for a 99 Ranger, can't seem to find out. Anyone have any answers or other suggestions. Thanks
Post Fiend
Joined: Jan 2003
Posts: 9,748
Likes: 16
From: Connecticut
No conversion kit available, as there are no alternative hubs available.
There is a very good discussion on the whole PVH system here:
https://www.ford-trucks.com/forums/s...d.php?t=113363
Also, note that you can convert your PVH system to a "constant engagement" system if you really can't stand the PVH system any longer:
https://www.ford-trucks.com/forums/s...d.php?t=248810
(apparently the pics aren’t available anymore)
There is a very good discussion on the whole PVH system here:
https://www.ford-trucks.com/forums/s...d.php?t=113363
Also, note that you can convert your PVH system to a "constant engagement" system if you really can't stand the PVH system any longer:
https://www.ford-trucks.com/forums/s...d.php?t=248810
(apparently the pics aren’t available anymore)
Senior User
Joined: Mar 2004
Posts: 219
Likes: 0
From: Indianapolis, IN
Welcome to the club....there's probably 100 or more people on here who have had the same thing happen to them. I still can't belive no one sells manual lock hub replacements. Seems like there would be such a market for them, since about everyone who has PVH breaks them.
Thread
Thread Starter
Forum
Replies
Last Post
