Is there write up somewhere on adding power windows and locks to the BII, specifically the 1990 style? I'm mainly interested in what kind of motors will work with the bronco II, I'm prepared to accomadate mounting. They just need to have the correct teeth.

 

LMCtruck.com Order a magazine, they have the locks and motors. Also you can look and see what years will also work for everything.

 

has any one swaped in manual windows in instead power windows ....

nothin worse than my power windows getting stuck up in the summer and down in the winter. i hate em.....

 

I'm sure you could, shouldn't be difficult, you would probably have to cut a hole in your panel though.

 

try to pick up a pair of power win/loc doors from a wrecker. they'll have all the wires and stuff.You mat even have to swap actual doors to accomodate actuator/switch/motor mounting.

 

Just a little question, what does the green button thing by my name mean?

 

that your on line

 

Dang I'm dumb, thanks.

 

no problem.....

i just want to say thanx to everyone....
you guys help keep the wrenches and the wheels turning!!

its nice to know there are other guys out there that have B2 fever as bad as me and you guys make things far less frustrating when it dont go right and get me back on the right track..

you would be amazed at the B.S. i have heard when i ask the garages around here a question about B2 trouble or compatable part swaps

any way thanx FTE!!! I have learned alot here..