85 Bronco II Modulator valve
Thread Starter
|
Junior User
Joined: Aug 2000
Posts: 59
Likes: 0
85 Bronco II Modulator valve
Hey, Anybody ever have to replace a modulator valve on A4LD.
Where did they hid it. I have one in hand, but could not find it.
Any help appreciated.
HeavyMetal (Rod)
1977 F100 429CJ bored 30 over, Heads milled 30, edelbrock performer cam, intake, lifters, valve springs, Flat top forged pistons, polished and ported, Holley 750 Legacy, Hooker Super Comp. headers with dual Hooker Comp. exhaust and Hooker dual resonators, B&M C-6 racing tranny, with a TCI Breakaway 2600 flash stall converter, 9" rear with 2-72 gears.
Where did they hid it. I have one in hand, but could not find it.
Any help appreciated.
HeavyMetal (Rod)
1977 F100 429CJ bored 30 over, Heads milled 30, edelbrock performer cam, intake, lifters, valve springs, Flat top forged pistons, polished and ported, Holley 750 Legacy, Hooker Super Comp. headers with dual Hooker Comp. exhaust and Hooker dual resonators, B&M C-6 racing tranny, with a TCI Breakaway 2600 flash stall converter, 9" rear with 2-72 gears.
Posting Guru
Joined: Feb 2000
Posts: 1,100
Likes: 0
From: Wichita USA
85 Bronco II Modulator valve
Try the right side near the rear edge of the pan pointed at the converter in a completely nonaccessable area.
2000 XLT Flare Supercab Sport 5.4-Auto-355LS-Tow pkg-Bedrug-Xtang Tonneau
2000 XLT Flare Supercab Sport 5.4-Auto-355LS-Tow pkg-Bedrug-Xtang Tonneau
Thread Starter
|
Junior User
Joined: Aug 2000
Posts: 59
Likes: 0
85 Bronco II Modulator valve
I think I feel it but sure can't see it.
Thanks for the help...
HeavyMetal (Rod)
1977 F100 429CJ bored 30 over, Heads milled 30, edelbrock performer cam, intake, lifters, valve springs, Flat top forged pistons, polished and ported, Holley 750 Legacy, Hooker Super Comp. headers with dual Hooker Comp. exhaust and Hooker dual resonators, B&M C-6 racing tranny, with a TCI Breakaway 2600 flash stall converter, 9" rear with 2-72 gears.
Thanks for the help...
HeavyMetal (Rod)
1977 F100 429CJ bored 30 over, Heads milled 30, edelbrock performer cam, intake, lifters, valve springs, Flat top forged pistons, polished and ported, Holley 750 Legacy, Hooker Super Comp. headers with dual Hooker Comp. exhaust and Hooker dual resonators, B&M C-6 racing tranny, with a TCI Breakaway 2600 flash stall converter, 9" rear with 2-72 gears.
Thread
Thread Starter
Forum
Replies
Last Post
Indy443
1973 - 1979 F-100 & Larger F-Series Trucks
4
Jan 10, 2014 08:10 PM
Jayman1976
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
10
Oct 7, 2013 12:15 PM
cws10190
Supercharger, Turbocharger, Nitrous Oxide & Water/Methanol Injection
2
Sep 19, 2013 01:36 AM
twistedmetal
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
8
Jul 2, 2005 07:16 AM
