leveling kit install
Thread Starter
|
New User
Joined: Aug 2004
Posts: 9
Likes: 0
leveling kit install
I want to install a leveling kit on my 03 f350 but I want to know what to expect. Whats the best way to remove the front springs, at least the front mount. The rear mount looks easy enough.
Junior User
Joined: Jun 2004
Posts: 98
Likes: 0
From: SW Missouri
I'm in the same boat as you are. I have a 99 350 CC SRW. I spent over 4 hours of reading on searches on this site. Lots of threads on lifts/leveling. What I found was there are two basic leveling kits. One, with hanger brackets and two new leaf/leaf packs. The hanger options seems to be pricey but very good and easy. The add a leaf or leaf packs might be a little cheaper but some people compline of the "add a leaf" squeking. I still have not decided what option I'm going to do. Figure I would go to some local 4x4 shops and see what kits are popular. I mainly use my truck as a work truck so I'm going to listen to the advise given to me on this board and go for only a 2/2.5 inch leveling kit. Keep me posted on what you come up with.
Thread Starter
|
New User
Joined: Aug 2004
Posts: 9
Likes: 0
I found what I thought was a good deal on a used leveling kit, but it is missing the track bar relocation bracket and from what I've been told your not supposed to reuse u-bolts. After adding up the cost of all the other parts it was just about the same as buying a new kit. I think I'll wait awhile before I do any suspension mods.
New User
Joined: Aug 2004
Posts: 1
Likes: 0
Look into www.skyjacker.com
They got what you want, I have a leveling kit on my F250 4x4 PS. But in time I am gonna swap out that junky Twin I-beam for a Dana 60.
But it looks better leveled than slopped.
SkyJacker75
They got what you want, I have a leveling kit on my F250 4x4 PS. But in time I am gonna swap out that junky Twin I-beam for a Dana 60.
But it looks better leveled than slopped.
SkyJacker75
Thread
Thread Starter
Forum
Replies
Last Post
usmcBTC
1999 - 2016 Super Duty
12
May 17, 2009 08:10 PM
