Horsepower rating
#3
according to my 79 motors truck manual:
72 390 2 barrell engine code H
8.2 to 1 compression
201 hp @ 4400 rpm
316 lb. ft. torque @ 2600 rpm
it list a 351 with 4 bbl carb, engine code Q:
8.6 to 1 compression
248 hp @ 5400 rpm
299 torque @ 3800 rpm
someone may have dropped in a 67-68 390 4bbl:
10.5 to 1 compression
320 hp @ 4800 rpm
427 torque @ 3200 rpm
maybe a mustang gt motor?
67-68 numbers seem a lot higher, but 72 was rated at the wheels, 67 at the flywheel
72 390 2 barrell engine code H
8.2 to 1 compression
201 hp @ 4400 rpm
316 lb. ft. torque @ 2600 rpm
it list a 351 with 4 bbl carb, engine code Q:
8.6 to 1 compression
248 hp @ 5400 rpm
299 torque @ 3800 rpm
someone may have dropped in a 67-68 390 4bbl:
10.5 to 1 compression
320 hp @ 4800 rpm
427 torque @ 3200 rpm
maybe a mustang gt motor?
67-68 numbers seem a lot higher, but 72 was rated at the wheels, 67 at the flywheel
Thread
Thread Starter
Forum
Replies
Last Post
davelong667
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
30
01-29-2017 11:36 PM
jrmandryck
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
3
06-27-2009 11:12 PM
lilpig88
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
7
05-30-2003 07:18 PM