Torqueshift/Tanny temp

Reply Subscribe

Thread Tools

Search this Thread

May 3, 2004 | 09:36 PM

Mscales

Thread Starter

Freshman User

Joined: Sep 2002

Posts: 37

Likes: 0

From: Denver USA

Torqueshift/Tanny temp

On my 02 F-250 with the 4R100 I put the tranny temp sender in the port on the drivers side of the tranny right above the pan rail. On the torqueshift it looks like the same port is there. Has anybody used this port for tranny temp sensor? Everything looks the same but I want to be sure before I set my guages up.

Thanks,
Mike

May 3, 2004 | 10:13 PM

PSD6litre40

Posting Guru

Joined: Jan 2004

Posts: 1,185

Likes: 0

From: Tennessee

Well, for one the tranny you have is not a Torqueshift transmission. The torqueshift is only available in the 6.0L DSL...........

May 3, 2004 | 10:27 PM

Mscales

Thread Starter

Freshman User

Joined: Sep 2002

Posts: 37

Likes: 0

From: Denver USA

My mistake. I traded in my 02 F-250 V-10 for a 04 F-250 6.0L. I was wondering if the port on the torqueshift was the same as my old truck.
Sorry for the confusion.

Mike