cup holders
Thread Starter
|
Junior User
Joined: Mar 2004
Posts: 51
Likes: 0
From: brant lake
cup holders
i have a 93' 150 with a bench seat and i despritly need cupholders. its a manual so its kinda hard to steer,shift and hold your hot coffee at the same time! im hopping ot find sometihng that can be screwed into the floor between the stick and the seat. any ideas? Steve
Elder User
Joined: Aug 2003
Posts: 859
Likes: 0
From: philly pa
i'm in the same boat. some of these trucks did have cup holders so if you go to a junk yard you may be able to find one. it sits near the shifter and i believe it hooks to the deat somehow. i found the the floor near the shifter it way to slanted to hold an aftermarket one and the holders that stick in the window are anoying. my dad's 96 f150 had a stock cup holder. it was nice because it didn't get in the way of the person sitting in the middle.
Lead Driver
Joined: Aug 2003
Posts: 6,305
Likes: 18
From: Boulder Creek, Ca
Not sure of cab design on the 93, but i have a 65, manual w/ buckets seats. Found a storage compartment w/ cup holders that sets on the transmission hump. Low profile, and does'nt take up much space, not too cumbersome for the person sitting in the middle. Find it works out great. Can not recall where purchased from. If interested, perhaps can find simular in JC Whitney, PEPBOYS, etc, or better yet, an RV supply source. May save some leg work if they have a web site and you browse their online catalog.
Good luck,
dave
Good luck,
dave
Last edited by daveengelson; Apr 2, 2004 at 06:41 AM.
Thread Starter
|
Junior User
Joined: Mar 2004
Posts: 51
Likes: 0
From: brant lake
well guys, i found a universial cupholder that will screw into and flat surface. upright or flat. www.drinkholders.com. im liking this beccause i can put it anywhere i want!
Elder User
Joined: Aug 2003
Posts: 859
Likes: 0
From: philly pa
Originally Posted by edgexcrider
well guys, i found a universial cupholder that will screw into and flat surface. upright or flat. www.drinkholders.com. im liking this beccause i can put it anywhere i want!
wow. 40 bucks is alot for a cup holder.
Elder User
Joined: Nov 2003
Posts: 669
Likes: 0
From: Chino Valley
heck, just get a hole bit for a drill and cut into the seat.......or the floor.......or anywhere that wont cost you 40 clams
Trending Topics
Postmaster
Joined: Dec 2002
Posts: 3,959
Likes: 9
From: USA
That's a neat cupholder, but I agree, $40 is alot of money for a cupholder, especially if it's only ONE you get for your 40 bucks.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
Did you notce that they did not have much in the way of cup holders that where made for U.S made vec.
Thread
Thread Starter
Forum
Replies
Last Post
SEH43
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
26
Aug 6, 2013 09:52 AM