Polyurethane bushing recommendations
Thread Starter
|
Fleet Mechanic
Joined: Nov 2022
Posts: 1,697
Likes: 416
I don't know if you'll be able to get the camber right with the CC824 springs plus a spacer. Do you know what the bushings are set to currently, with just the springs? Best I recall, max adjustment is 3.4 degrees, so if you're already at 3 degree correction, probably a no-go, but if only at 1.5 degrees now, might be ok.
It was more or less just an idea, I'm not dead set on installing spacers.
Last edited by Junktownbill99; Apr 14, 2026 at 10:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
rickeylipham
1987 - 1996 F150 & Larger F-Series Trucks
2
Apr 2, 2008 08:28 PM
tgore3
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
9
Sep 11, 2006 09:02 AM
pdqford
1973 - 1979 F-100 & Larger F-Series Trucks
14
Jul 18, 2003 12:38 AM
