910 Spring Install Question
Thread Starter
|
Cross-Country
Joined: Aug 2011
Posts: 56
Likes: 2
From: KY
910 Spring Install Question
Just want to double check myself, and I’m open to suggestions.
Shooting for 125# from my research that seems like a good number so 1.750-1.700?
Measures 1.850 no seal
Seal- 0.045
So I need to add roughly 0.055 shim.
Someone please correct me if I’m wrong or shooting for the wrong spring pressure.
EDIT: I guess another question should be how critical is pressures to be even? If one is 1.7 and one is 1.750 because that’s the closest could get without going under 1.7 is that a huge deal?
Shooting for 125# from my research that seems like a good number so 1.750-1.700?
Measures 1.850 no seal
Seal- 0.045
So I need to add roughly 0.055 shim.
Someone please correct me if I’m wrong or shooting for the wrong spring pressure.
EDIT: I guess another question should be how critical is pressures to be even? If one is 1.7 and one is 1.750 because that’s the closest could get without going under 1.7 is that a huge deal?
Lead Driver
Joined: Apr 2016
Posts: 7,213
Likes: 1,342
From: Bahstun
Thread
Thread Starter
Forum
Replies
Last Post
RustyKnees
1987 - 1996 F150 & Larger F-Series Trucks
12
Jun 28, 2025 09:25 PM
Scndsin
1987 - 1996 F150 & Larger F-Series Trucks
16
Oct 17, 2023 10:26 PM
icrman
Clutch, Transmission, Differential, Axle & Transfer Case
4
Jul 27, 2022 02:16 PM
mrandall
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
2
May 16, 2002 11:47 PM
