Tailgate Handle Camera??
Thread Starter
|
Lead Driver
Joined: Feb 2000
Posts: 5,371
Likes: 46
From: Palm Bay, Florida
Tailgate Handle Camera??
I bought a Tailgate Masters brand and am going to install it.
Everything seems straight forward except where to run the wires out of the tailgate.
Anyone have one?
Any ideas?
Everything seems straight forward except where to run the wires out of the tailgate.
Anyone have one?
Any ideas?
Lead Driver
Joined: Aug 2022
Posts: 5,031
Likes: 1,406
From: Oologah, OK
I would choose the left side, as that has a "socket" in most pickups.
mine is on top of the License Plate and the wire runs thru the tube frame bumper to the driver side frame, we zip tied it to the frame, and then up the firewall.
some go thru a hole in the floor, which in restrospect, I think would be better, if the body is raised up off the frame. ( but, the tailgate wire better have a connector to unplug. )
mine is on top of the License Plate and the wire runs thru the tube frame bumper to the driver side frame, we zip tied it to the frame, and then up the firewall.
some go thru a hole in the floor, which in restrospect, I think would be better, if the body is raised up off the frame. ( but, the tailgate wire better have a connector to unplug. )
FTE Chapter Leader
Joined: May 2020
Posts: 2,924
Likes: 2,180
From: Langley B.C. Canada
I know that Jeff has previously installed a home cooked tailgate handle camera, then went to a pre-assembled style.
Got Data?
Joined: Dec 2012
Posts: 4,236
Likes: 1,368
From: Lake Stevens, WA
I think I used an existing hole in the tailgate bottom to exit the harness for the camera. Here's the thread on this.
BWST's F350 maintenance/upgrade thread - Page 28 - Ford Truck Enthusiasts Forums
BWST's F350 maintenance/upgrade thread - Page 28 - Ford Truck Enthusiasts Forums
Thread
Thread Starter
Forum
Replies
Last Post
reamer
2015 - 2020 F150
3
Mar 15, 2019 03:10 PM
