Need a dimension/measurement, please.
Thread Starter
|
More Turbo
Joined: Sep 2012
Posts: 739
Likes: 256
From: Zimmerman, MN
Need a dimension/measurement, please.
Can someone please take an accurate measurement of the width of the bed between the two vertical portions of the wheel wells for me? I'm looking at a slide-in camper for my '92 F250, and both of my OBS trucks have bed liners that come up and out over the rails, and have toppers sitting on top of them. Kinda hard to get them out for this...
The camper measures 48-3/8" at the front (it has 3/16" angle iron brackets on each corner), and while I assume it will fit (since a 4' x 8' sheet will lay flat), I don't know if that extra 3/8" is a deal breaker, as I'd rather slide the camper in place than drop it in place.
Thanks in advance!
Jim
The camper measures 48-3/8" at the front (it has 3/16" angle iron brackets on each corner), and while I assume it will fit (since a 4' x 8' sheet will lay flat), I don't know if that extra 3/8" is a deal breaker, as I'd rather slide the camper in place than drop it in place.
Thanks in advance!
Jim
Thread Starter
|
More Turbo
Joined: Sep 2012
Posts: 739
Likes: 256
From: Zimmerman, MN
Wonderful, and thank you so much!
I didn't know how much clearance there would be, as I hear that Manufacturers have been "tightening things up" (since the 60's and 70's) to save weight and costs.
Much appreciated!
Jim
I didn't know how much clearance there would be, as I hear that Manufacturers have been "tightening things up" (since the 60's and 70's) to save weight and costs.
Much appreciated!
Jim
Thread Starter
|
More Turbo
Joined: Sep 2012
Posts: 739
Likes: 256
From: Zimmerman, MN
Thread
Thread Starter
Forum
Replies
Last Post
zroughneck
1973 - 1979 F-100 & Larger F-Series Trucks
4
Apr 21, 2008 08:49 AM
windevil pete
1973 - 1979 F-100 & Larger F-Series Trucks
2
Feb 9, 2008 09:07 PM
