Ford Truck Enthusiasts Forums - View Profile: jas88

Go Back  Ford Truck Enthusiasts Forums > Members
Reload this Page >

jas88's Profile

Notices
jas88 has a great reputation on FTE.jas88 has a great reputation on FTE.jas88 has a great reputation on FTE.jas88 has a great reputation on FTE.jas88 has a great reputation on FTE.

jas88 jas88 is offline

Postmaster

Visitor Messages

Showing Visitor Messages 1 to 10 of 19
  1. Cluelessinnm
    09-05-2017 09:54 AM - permalink
    Thanks for your reply on my post about my f150. Threads on the site suggested I use a screwdriver and place it on the 2 largerst brass connections on solenoid. We connected everything as should be on the solenoid. It starts right up.....someone suggested if the truck started when screwdriver was applied to solenoid...then the solenoid was bad???? We replaced it, and tested again....and truck started??? Could the batter be good but the negative terminal bad?
  2. dirtydieselman
    11-25-2015 05:29 PM - permalink
    wanted to say thank you.I read a little bit about your high idle problem with the 460 and I installed the 2 machine screws in the butterflies and it worked perfect, and this is after all the intake manifold gasket, vacuum line stuff, IAC, etc. What a relief.
  3. jas88
    04-16-2014 03:10 PM - permalink
    Do you have the M5OD transmission?
  4. RickTFL
    04-15-2014 09:17 AM - permalink
    Hi. I was referred to you as you may know this. I have a 1991 F150 2WD and I need to bleed the clutch. I can't find the bleed valve. Do I have to remove the bell housing? Thanks Rick
  5. jas88
    06-20-2013 08:13 AM - permalink
    I've got lots of pics. Take a look at the thread about "butterface" trucks.
  6. Redneckfordf2502002
    06-19-2013 01:55 PM - permalink
    love your truck (the one in your avatar) was wondering if you had more pics how you have it is how I want my 88 F150 to look except regular cab and I have a chrome brush guard but the paint scheme and headache rack is all perfect.
    Trav
  7. jas88
    03-18-2013 12:42 PM - permalink
    It came on a parts truck I bought years ago.
  8. Kolchakxi
    03-11-2013 01:32 AM - permalink
    Saw the brush guard on your white rig... wondering where you got it? Thanks.

    TJ
  9. aberg0812
    12-12-2012 02:36 PM - permalink
    I see your truck is like mine, did you ever have to but rear lower cab corners on it, I have to, but dont know where to start. the bed is already off of it though.
  10. Bronco330022
    06-15-2012 07:41 AM - permalink
    Can you post the 1990 F150 brochure?

About Me

  • About jas88
    Location
    Greater Austin, Texas
    2 Letter State/Province (use "--" for outside USA/
    TX
    Country of Residence
    US
    Make
    Ford
    Model
    F-150
    Year
    1991
    Current Mileage
    150,000 - 199,999
    Miles per year
    15,000 - 19,999
  • Signature
    1975 Cougar XR7 351W/C4
    1978 Ranchero GT 351M/C4
    1991 F150 SuperCab 4x4 7.5L/ZF5
    2006 Freestyle 3.0L/AWF21

Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Yesterday 02:36 PM
  • Join Date: 02-12-2002
  • Referrals: 0

Friends

Showing Friends 1 to 5 of 5

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2018 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.