When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hopefully I get a response before the morning but I have a 1994 f150 XLT 4.9 i6 5 speed 4x4 my clutch went out the other day so I ordered a new one well problem is I ordered the 10inch clutch instead of the 11 what are the pressure plate bolts size for the 10inch clutch? And before y'all jump on me saying return it no lol trucks being sold soon as I get this clutch in
Not jumping on you, but just saying to you
"Get the correct 11 inch clutch"
Replace the slave cylinder and the pilot bearing along with all 3 pieces of the clutch
A 10" came on my 81 F100 and that is what I replaced it with as I did not know of the flywheels being drilled for both 10" & 111" clutch.
Truck came with a bad T18 and I replaced it with a NP435 and advance adapter range splitter over drive giving me 8 speed transmission.
It helps to split the gears when pulling a 20 foot enclosed trailer for the car club. Oh the truck has a 2.75 rear gear in a 9".
Dave ----