Troubleshooting hard start
Thread Starter
|
Tuned
Joined: Jun 2010
Posts: 349
Likes: 33
This is what you need for the fuel line from Filter to Injection Pump.
Install hose onto IP, fill line with Fuel, ATF, or?? to eliminate air in the line.
then connect to Filter.
https://russrepair.com/filter-to-ip-...ne-delete-kit/
Install hose onto IP, fill line with Fuel, ATF, or?? to eliminate air in the line.
then connect to Filter.
https://russrepair.com/filter-to-ip-...ne-delete-kit/
Lift pump has been replaced with Facet, so all is good there.
I keep that return line from filter to #1 injector replaced with clear hose for now just to see what's going there and may delete it later, will see.
There is no job for the truck right now at least until after holidays and it's either too cold, or raining, so no rush.
Thread
Thread Starter
Forum
Replies
Last Post
chancevegas
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
17
Oct 14, 2022 09:48 PM
Ford_Rush
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
1
Aug 27, 2022 07:32 AM
Baddhabit
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
11
Jan 7, 2013 09:25 PM
jt46321
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
10
Dec 17, 2009 05:34 PM
