F4 PTO Help
Thread Starter
|
Mountain Pass
Joined: Mar 2024
Posts: 149
Likes: 101
From: Pennsylvania
F4 PTO Help
My linkage for my PTO on my new to me transmission is set up a little different then my old crash box. Can people share pictures of how your PTO shift rod connects to their transmission so I can have some ideas on how to fabricate mine.
Thank you in advance!
Thank you in advance!
Thread Starter
|
Mountain Pass
Joined: Mar 2024
Posts: 149
Likes: 101
From: Pennsylvania
I didn’t think to look before we put it in today. Maybe tomorrow I can try and get some pictures.
Tuned
Joined: Sep 2017
Posts: 385
Likes: 29
From: Pinckney Mi.
Mine is cable operated, I think this is what your asking????
Or at least mine was, I removed the PTO gearbox, as I removed my dump bed.
51 M3 here.
Crash box removed and given away, T98 installed.
I drove the crash box around the block(3 miles) once,was enough fur me.
Good Luck at ya.
Gw
Or at least mine was, I removed the PTO gearbox, as I removed my dump bed.
51 M3 here.
Crash box removed and given away, T98 installed.
I drove the crash box around the block(3 miles) once,was enough fur me.
Good Luck at ya.
Gw
Thread Starter
|
Mountain Pass
Joined: Mar 2024
Posts: 149
Likes: 101
From: Pennsylvania
Mine is cable operated, I think this is what your asking????
Or at least mine was, I removed the PTO gearbox, as I removed my dump bed.
51 M3 here.
Crash box removed and given away, T98 installed.
I drove the crash box around the block(3 miles) once,was enough fur me.
Good Luck at ya.
Gw
Or at least mine was, I removed the PTO gearbox, as I removed my dump bed.
51 M3 here.
Crash box removed and given away, T98 installed.
I drove the crash box around the block(3 miles) once,was enough fur me.
Good Luck at ya.
Gw
Thread
Thread Starter
Forum
Replies
Last Post
