Radiotor

Reply Subscribe

Thread Tools

Search this Thread

Jan 15, 2024 | 09:23 PM

Ktawhio

Thread Starter

1st Gear

Joined: Jan 2024

Posts: 1

Likes: 0

Radiotor

I am looking for some help here i upgraded my radiator a while ago to an aftermarket nice 4 core aluminum radiator no my stock revisor does not work very well it pinches the small hose at the top and pushes it closer to my ac composer leaving very little clearance. see if anyone has done any aftermarket one. if you have which one works the best.

Jan 16, 2024 | 10:56 PM

aawlberninf350

It's a Van Gogh

Joined: Feb 2010

Posts: 7,813

Likes: 1,335

From: Elk Grove, CA

Maybe you can make a custom mount for the OEM bottle?

I'd hate to spend $$ on an aluminum degas bottle especially if only has a small sight glass.

Jan 17, 2024 | 01:06 AM

callforfire

More Turbo

Joined: Sep 2015

Posts: 640

Likes: 282

From: Texas

I know the exact problem as I had it myself, even with an aftermarket degas. Part of the solution is trimming the hose down close to the bend so it can lay in there closer to the rad.
You'll still need to lean the degas bottle out a bit but not nearly as much.