Frame question
Thread Starter
|
5th Wheeling
Joined: May 2013
Posts: 34
Likes: 0
I ended up bolting 2 12" x 12" plates on the bed. Once that was in place at all but eliminated the flex of the bed. I used it to move a 6 x 13 foot steel and redwood RV gate into installation position. Worked like a charm. Totally agree that if you wanna do it 100% you'd want to weld or bolt something up to the frame. But it worked. Job's done.
Thread Starter
|
5th Wheeling
Joined: May 2013
Posts: 34
Likes: 0
I ended up bolting 2 12" x 12" plates on the bed. Once that was in place at all but eliminated the flex of the bed. I used it to move a 6 x 13 foot steel and redwood RV gate into installation position. Worked like a charm. Totally agree that if you wanna do it 100% you'd want to weld or bolt something up to the frame. But it worked. Job's done.
Thread
Thread Starter
Forum
Replies
Last Post
scottlathrop
1961 - 1966 F-100 & Larger F-Series Trucks
26
Jun 3, 2019 08:19 PM
