CJ-MEA
Fleet Mechanic
Joined: Jul 2000
Posts: 1,493
Likes: 346
From: SE Iowa
A picture would be great. To my knowledge, every CJ block had a letter "C" on the back of the block. Exception was maybe early '68 models.
What does the cylinder bore measure? The crankshaft will have a 1U casting mark on one of the counterweights.
If you have the heads, they will have C8OE-N casting numbers. Intake will be C8OE as well.
Check out www.428cobrajet.org for more component identification.
What does the cylinder bore measure? The crankshaft will have a 1U casting mark on one of the counterweights.
If you have the heads, they will have C8OE-N casting numbers. Intake will be C8OE as well.
Check out www.428cobrajet.org for more component identification.
Thread
Thread Starter
Forum
Replies
Last Post
J Scott
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
1
Mar 20, 2018 04:09 PM
