Driver Priority unlock
Thread Starter
|
1st Gear
Joined: Apr 2023
Posts: 1
Likes: 0
Driver Priority unlock
I have a 2010 f-150 with a viper security system installed. The one thing I have still yet to figure out, is how to wire it to only unlock the driver door first. The wiring diagram shows that you can use one of the accessories to run on 2nd unlock which I would run my main unlock circuit wire to, but, and I don’t know that much about how vehicles are wired, but could I just run the main unlock ground to the actuator on the driver door with a diode or does it not have constant 12v+, but another idea I had is take a relay, and use the ground to activate it and have the diode on the positive side. All help is greatly appreciate, trying to get everything done on the truck with my drivers test less than 2 months away.
Thread
Thread Starter
Forum
Replies
Last Post
swhite005
Explorer, Sport Trac, Mountaineer & Aviator
1
Jun 4, 2005 03:32 AM
