that is perfect. thank you for sticking through this with me!

 

hey @manicmechanic007 , so i bought these and they are junk

https://www.summitracing.com/parts/s...QaAup8EALw_wcB

The reason i bought them is the up to 4 degrees camber and caster adjustment. According to the chart on the page linked below, although it is for 1989 says at ~3 3/4 ride height i should be about + 4.5 degrees caster and 0 camber. am i reading that correctly? it seems finding that sleeve with a quality metal appears to be tough. SPC has them up to 2 3/4 degrees caster but that wouldn't be enough.

 

Damn straight
The aftermarket ones are pot metal and break when trying to remove
Specialty 23112 is the only aftermarket ones I like to use and they sometimes break the tabs when removing too