installing steering stabilizer
Thread Starter
|
Cross-Country
Joined: Dec 2009
Posts: 85
Likes: 1
installing steering stabilizer
My 2000 F250 4wd with leaf springs front and rear has a wandering problem. I'm changing out the shocks and looking to add a steering stabilizer. The truck does not currently have a steering stabilizer installed. When I look at videos to install one, I only find vids installing on trucks that currently have a stabilizer. On my truck, I have a mounting point on the passenger side- kind of a U shaped steel bracket. I do not have a bracket on the driver side to mount the stabilizer. I'm not sure where to buy the bracket, and how precise the measuring would be to mount the stabilizer correctly. Any ideas?
Thanks!
Thanks!
Fleet Mechanic
Joined: Jun 2015
Posts: 1,635
Likes: 564
You’ll need this https://www.tascaparts.com/oem-parts...et-f81z3e652aa
And this
might also need to purchase u bolts for the bracket. Tractor supply or Home Depot should do the trick
And this
might also need to purchase u bolts for the bracket. Tractor supply or Home Depot should do the trick
Butt-Head
Joined: Apr 2004
Posts: 9,448
Likes: 2,934
From: Reed Point, MT
You can also get used to the vehicle "wandering". These things are notorious for needing to be herded from shoulder to the center line. A stabilizer on the tie rod won't fix that. It sucks, but it keeps my wife from ever wanting to drive any of my pickups!
Tuned
Joined: May 2021
Posts: 363
Likes: 121
From: Montana
I've been fighting some wandering too. I put in a new blue top steering box, all new inner/outer tie rods, new ball joints, wheel bearings. It's improved things a good bit, but not perfect.
I would've liked to drive one new. Was steering ever tight in these?
I am now driving more than herding the truck down the road, so good enough.
Good luck with the stabilizer, let us know how much it helps.
I would've liked to drive one new. Was steering ever tight in these?
I am now driving more than herding the truck down the road, so good enough.
Good luck with the stabilizer, let us know how much it helps.
FTE Chapter Leader
Joined: May 2020
Posts: 2,934
Likes: 2,193
From: Langley B.C. Canada
I’m getting close to installing the same steering stabilizer as fordcowboy has linked. It’s currently sitting in my Amazon cart.
As far as the bracket goes mine was never equipped either.
Been looking into the different options and pricing on the market and decided that I have enough 1/4” flat stock that I’m gonna make my own. Being frugal and having some fab skills also helped to make that decision.
As far as the bracket goes mine was never equipped either.
Been looking into the different options and pricing on the market and decided that I have enough 1/4” flat stock that I’m gonna make my own. Being frugal and having some fab skills also helped to make that decision.
Thread Starter
|
Cross-Country
Joined: Dec 2009
Posts: 85
Likes: 1
Thanks FordCowboy! My local dealer assured me that this part was no longer available from Ford. The Bilstein stabilizer you linked is the same one I was looking at. My buddy has the same model truck, so I'm hoping his has the stabilizer and I can use the measurements from his truck to mount to mine.
Papa Smurf
Joined: Nov 2009
Posts: 1,080
Likes: 204
From: Woodstock, GA
Trending Topics
FTE Leadership Emeritus
Joined: May 2014
Posts: 27,352
Likes: 5,946
From: Lake Hartwell, GA
I installed the Bilstein front stabilizer in 2016 with the OEM parts and it made a noticeable difference in the steering. I travel cross country towing a 5th wheel and decent steering is not a nicety, it is a necessity and a safety point.
The biggest difference came with the removal of the steering gear and installing a Blue Top gear, but the stabilizer helped as did the Hellwig sway bar.
I was lucky and adopted the OEM parts from a friend who removed them in order to install an aftermarket dual stabilizer.
Good luck and keep us updated.
The biggest difference came with the removal of the steering gear and installing a Blue Top gear, but the stabilizer helped as did the Hellwig sway bar.
I was lucky and adopted the OEM parts from a friend who removed them in order to install an aftermarket dual stabilizer.
Good luck and keep us updated.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread
Thread Starter
Forum
Replies
Last Post
96mudtruck
1987 - 1996 F150 & Larger F-Series Trucks
7
Apr 14, 2020 04:34 PM
Wyowanderer
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
0
Nov 29, 2015 01:42 PM
blownbronco
Brakes, Steering, Suspension, Tires, & Wheels
1
Jan 6, 2003 09:25 PM
