New window regulators
Thread Starter
|
Tuned
Joined: Mar 2017
Posts: 351
Likes: 57
New window regulators
The old worn out regulator in my drivers side door has bit the dust. Crank just spins when going up. Window is about 1/2 inch from the top. Seems like amazon autozone and JEffs Bronco Graveyard all show the same stock picture, and are all within 39-49 dollars. Autozone says theirs is dorman.
Are the new regulators from JBG dorman brand? I’d like to buy from a nicer brand than dorman.
Anyone have any experience with the dorman regulators or the ones that JBG sells?
Are the new regulators from JBG dorman brand? I’d like to buy from a nicer brand than dorman.
Anyone have any experience with the dorman regulators or the ones that JBG sells?
Cross-Country
Joined: Apr 2021
Posts: 86
Likes: 16
My truck had the bolts and not the rivets which was way harder to find. A lot of the pictures from the catalogs were of the bolt in type but were actually not. If it matters to you the only place that I found that had the bolt in type was Bronco Graveyard. Mine is new and the truck doesn't drive so I don't have a review for durability but all the materials felt very comparable to what I was replacing.
Thread Starter
|
Tuned
Joined: Mar 2017
Posts: 351
Likes: 57
Weird you say that. My trucks were riveted and I cut the rivets and bolted in a set of bolt ons which lined up with the holes in the door. I’ve already replaced my original wore out regulators for these original regulators which I have since worn out.
Thread
Thread Starter
Forum
Replies
Last Post
86F150302
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
12
Dec 23, 2007 08:09 PM
FreeAgentRider6
1978 - 1996 Big Bronco
3
Jun 30, 2003 02:44 PM
