Running rough after fender bender
Thread Starter
|
More Turbo
Joined: Oct 2003
Posts: 597
Likes: 22
From: Central Maine
Running rough after fender bender
2002, 250k mi
Boy had a front end fender bender, 35mph, dented the bumper and cracked the grill but not bad. Drove it home, no power and a rough idle (sounds like big cam on a drag car). Fires back up fine after shut down. Boys just did glow plugs and harness under the covers last winter. Wonder if an injector got unclipped after the accident? It ran perfect up until accident, no lights. Engine light is on now. Where should I start? Thanks,
Boy had a front end fender bender, 35mph, dented the bumper and cracked the grill but not bad. Drove it home, no power and a rough idle (sounds like big cam on a drag car). Fires back up fine after shut down. Boys just did glow plugs and harness under the covers last winter. Wonder if an injector got unclipped after the accident? It ran perfect up until accident, no lights. Engine light is on now. Where should I start? Thanks,
Thread Starter
|
More Turbo
Joined: Oct 2003
Posts: 597
Likes: 22
From: Central Maine
Cancel that, running good now. PS valve cover plug was dangling. Plugged it, light went out, smooth as a kitten now. Back to bumer repair....
Dad: " check the valve cover plugs one more time just to be sure"
Boys: "oh yea, one clip was busted when I put new plugs in, that may be it"
Dad: " check the valve cover plugs one more time just to be sure"
Boys: "oh yea, one clip was busted when I put new plugs in, that may be it"
Thread
Thread Starter
Forum
Replies
Last Post
carlspeed
1999 - 2003 7.3L Power Stroke Diesel
7
Jul 11, 2014 02:42 PM
eviltrekker
1994.5 - 1997 7.3L Power Stroke Diesel
3
Sep 13, 2006 03:58 PM
