6.0 is stalling
Thread Starter
|
New User
Joined: Dec 2021
Posts: 4
Likes: 0
6.0 is stalling
Hey guys got a 2007 f250 just got a motor in the truck from a know mechanic drove the truck for about 4 days now it’s stalling out on me if i give it over 2500 rpm’s seems like it lacks fuel when trying to start back up changed icp, ipr, ficm is getting good readings has upgraded blue spring kit but the mechanic said lift pump or fuel strainer just not sure if that sounds right!
Reply
Reply
Fleet Mechanic
Joined: Sep 2006
Posts: 1,491
Likes: 295
From: Fresno, CA
You need to put a scanner on it and look at the live data from the engine. With that you can usually figure out what's going on. Could be any number of things. Also a fuel pressure gauge is very helpful in troubleshooting fuel issues and unfortunately wasn't included from the factory. Easy enough to add.
The 6.0 forums has a huge tech section to help with troubleshooting these engines. I recommend you head over there.
The 6.0 forums has a huge tech section to help with troubleshooting these engines. I recommend you head over there.
Thread
Thread Starter
Forum
Replies
Last Post
