Need STEERING UNIVERSAL for C series
Thread Starter
|
Cross-Country
Joined: Apr 2019
Posts: 82
Likes: 8
From: Brighton MI
Need STEERING UNIVERSAL for C series
HI GUys
Well I did a search here, before moving to Google or calling Bill at Hipoparts I hope I could ask here!
Now that I have some time - I am going to replace the SMALL U joint on the steering shaft of the 1968 C800 truck.
I bought a number at a Ford swap meet (just by sight) BUT hope to get a part number /conversion number or WOULD BUY if any members have for sale.
With THanks
Mark
Well I did a search here, before moving to Google or calling Bill at Hipoparts I hope I could ask here!
Now that I have some time - I am going to replace the SMALL U joint on the steering shaft of the 1968 C800 truck.
I bought a number at a Ford swap meet (just by sight) BUT hope to get a part number /conversion number or WOULD BUY if any members have for sale.
With THanks
Mark
Thread Starter
|
Cross-Country
Joined: Apr 2019
Posts: 82
Likes: 8
From: Brighton MI
MIS Diagnosed ! With the shaft out.....looks like the two universals are good!
I have what I describe as a "skip" when turning the wheel . No loss of steering or range JUST a "BUMP". I think I will remove the column and see if in the inner bearings.
Mark
I have what I describe as a "skip" when turning the wheel . No loss of steering or range JUST a "BUMP". I think I will remove the column and see if in the inner bearings.
Mark
Thread
Thread Starter
Forum
Replies
Last Post
theenforcer
1999 - 2003 7.3L Power Stroke Diesel
8
Aug 6, 2012 06:59 PM
brett_d
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
Feb 27, 2008 06:16 AM
