Bad PCM - Not Grounding GPR
Thread Starter
|
More Turbo
Joined: Mar 2009
Posts: 506
Likes: 5
From: South Florida
Bad PCM - Not Grounding GPR
Does anyone have a good source which I can send in my spare PCM (VDH5) ...which I use for my DP tuner chip for repair?
I have been chasing an issue where my GPR will not activate my glow plugs (P0380) for a while now till I did some testing and come to the conclusion that the PCM is the issue when I reinstalled my original PCM
on the truck and everything worked fine including the DTC not showing up.
I need to repair it, buy a used one or find a way to ground it so it works.....
Any advise?
I have been chasing an issue where my GPR will not activate my glow plugs (P0380) for a while now till I did some testing and come to the conclusion that the PCM is the issue when I reinstalled my original PCM
on the truck and everything worked fine including the DTC not showing up.
I need to repair it, buy a used one or find a way to ground it so it works.....
Any advise?
Fleet Mechanic
Joined: Jun 2015
Posts: 1,635
Likes: 564
Contact these guys here...
https://www.dieseltechchatt.com/pages/about-d-t-c
Myself along with several others here have had great success with them.
https://www.dieseltechchatt.com/pages/about-d-t-c
Myself along with several others here have had great success with them.
Thread
Thread Starter
Forum
Replies
Last Post
oldgameandfishdiesel
1999 - 2003 7.3L Power Stroke Diesel
4
Jan 29, 2010 11:49 AM
