Evap pressure specs
Thread Starter
|
Junior User
Joined: Jan 2008
Posts: 89
Likes: 0
From: NW Tennessee
Evap pressure specs
Hey yall, I usually hang out in the dieael forums, but I have my sister in law's 2013 fusion se, that she bought. Coming up with a p0303 dtc, and a p144c dtc. Looks like it has an aftermarket coilpack on no. 3 so I swaped the no 3 ad 2 around to see if the 303 changes. I checked voltage on the evap solenoid and am getting just under 12 volts, like 11.6, and after cleaning the connection, i can feel vacuum on the line when its disconnected at the solenoid on the solenoid side. Anyone know what the vacuum should be measured at? Im using the torque pro app. Thanks a bunch. I know it aint a truck, but I usually have good luck with these forums.
Thread
Thread Starter
Forum
Replies
Last Post
