Cobra 29 cb install
Thread Starter
|
Cross-Country
Joined: Oct 2019
Posts: 53
Likes: 14
Unleashed thank you. That info answered a lot of things. Also confirming what 01excursion had also said. I believe the driver cowl location, and removing and soldering the tip of the coax will provide the best install.
Thanks to all for your help, this new to me Excursion and CB are going to be getting some use.
Thanks to all for your help, this new to me Excursion and CB are going to be getting some use.
Fleet Mechanic
Joined: Nov 2015
Posts: 1,845
Likes: 191
From: NoVA
Unleashed thank you. That info answered a lot of things. Also confirming what 01excursion had also said. I believe the driver cowl location, and removing and soldering the tip of the coax will provide the best install.
Thanks to all for your help, this new to me Excursion and CB are going to be getting some use.
Thanks to all for your help, this new to me Excursion and CB are going to be getting some use.
You are welcome! This, IMO, is the best looking installation for a CB antenna on the EX.
Thread Starter
|
Cross-Country
Joined: Oct 2019
Posts: 53
Likes: 14
Yeah, not to mention most practical. I think the only thing i'm going to do differently is add a folding braket that lets me lay the antenna down against the a-pillar. Just need to make the bracket because I can't let myself pay this for that!
Thread
Thread Starter
Forum
Replies
Last Post
powerstroker100
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
56
Jun 20, 2010 10:57 PM
