Help!
Thread Starter
|
New User
Joined: Jun 2019
Posts: 2
Likes: 0
Help!
I changed my AIR FILTER and now, surprise, it won’t start. Is this a thing?
plugged both sensors back in. I did disconnect the hose that runs from the resovoir to the radiator as well as the battery
plugged both sensors back in. I did disconnect the hose that runs from the resovoir to the radiator as well as the battery
Last edited by Dlatty; Jun 9, 2019 at 10:02 AM. Reason: More info added
Fleet Mechanic
Joined: Jul 2018
Posts: 1,629
Likes: 103
From: Jacksonville Florida
Do you have a code reader. It would help the guys here to see what your readings are.
Icp
Ipr
Ipr duty cycle
FICM Voltage
Ficm power
Therse is a long list. You would be good to get and obd11 Bluetooth dongle and download Forscan lite to your mobile device. 30 40 dollars all together. It is the best out there right now for reading codes on a 6.0.
Icp
Ipr
Ipr duty cycle
FICM Voltage
Ficm power
Therse is a long list. You would be good to get and obd11 Bluetooth dongle and download Forscan lite to your mobile device. 30 40 dollars all together. It is the best out there right now for reading codes on a 6.0.
Fleet Owner
Joined: Apr 2012
Posts: 27,307
Likes: 549
From: Spanaway
One other point on the battery connections.
Did you remove the wire that taps the main power?
Here is the Power Distribution Diagram. I also
gave you the relay and fuse PDF. Both of these
are for the 2004 year.
Did you remove the wire that taps the main power?
Here is the Power Distribution Diagram. I also
gave you the relay and fuse PDF. Both of these
are for the 2004 year.
Thread
Thread Starter
Forum
Replies
Last Post
BakedPotato65
Electrical Systems/Wiring
8
May 16, 2026 06:38 AM
GreaseGun Joe
1968-Present E-Series Van/Cutaway/Chassis
5
May 30, 2021 08:01 AM
genny76
1983 - 2012 Ranger & B-Series
3
Mar 4, 2016 12:48 AM
1993 E-150
1968-Present E-Series Van/Cutaway/Chassis
2
Jan 10, 2008 08:55 PM
