When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I painted my side badges and have LED to light them. I want to run them on the parking light circut. Seems simple enough find the parking light hot circut for the positive side and ground the other to the frame, RIGHT? How and where should I look for the parking lights on both sides of the truck? How should I make the connection? Thanks in advance for the help.
There is a thread on this forum if you do a little searching . Another member was able to fish the wires to the front through a very small opening in the fender . I ran mine down the and under to the frame as I wanted my lights connected to the running board lights so they would fade off . Good luck and show us the pics !!!
