.
Clean Short bed $300
Thread Starter
|
Cargo Master
Joined: Oct 2016
Posts: 2,738
Likes: 217
From: Northern VA
Clean Short bed $300
https://easternshore.craigslist.org/...872877535.html
For the people that always ask where all the cheap parts went
For the people that always ask where all the cheap parts went
FTE Legend
Joined: Nov 2015
Posts: 30,966
Likes: 4,130
From: Angier, NC
Good thing my car trailer is not ready for the road at this time as it is only a few hours up the road.
So an 80 F100 with a 5 speed trany?
Grille is also not for the truck.
Wonder what parts can with it? be nice to get any motor(s) and all tranys.
Hood & tail lights would be good too.
Dave ----
So an 80 F100 with a 5 speed trany?
Grille is also not for the truck.
Wonder what parts can with it? be nice to get any motor(s) and all tranys.
Hood & tail lights would be good too.
Dave ----
Lead Driver
Joined: Apr 2007
Posts: 5,958
Likes: 105
From: Houston
Good thing my car trailer is not ready for the road at this time as it is only a few hours up the road.
So an 80 F100 with a 5 speed trany?
Grille is also not for the truck.
Wonder what parts can with it? be nice to get any motor(s) and all tranys.
Hood & tail lights would be good too.
Dave ----
So an 80 F100 with a 5 speed trany?
Grille is also not for the truck.
Wonder what parts can with it? be nice to get any motor(s) and all tranys.
Hood & tail lights would be good too.
Dave ----
Lead Driver
Joined: Apr 2002
Posts: 5,377
Likes: 1,260
No picture of the driver's side...who know's might be a dual tank with two fuel doors Rusty. I'm starting to like the idea of the flareside look for a hot rod truck. If I lived closer I might rent a trailer.
BB2
BB2
Trending Topics
Logistics Pro
Joined: Jan 2001
Posts: 3,789
Likes: 26
From: Connecticut
Flaresides didn't have "factory" dual tanks....
5-sp could it be the sought after ZF conversion? That alone is worth it!
5-sp could it be the sought after ZF conversion? That alone is worth it!
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
FTE Legend
Joined: Sep 2003
Posts: 54,081
Likes: 2,440
From: NY and VA
Good thing my car trailer is not ready for the road at this time as it is only a few hours up the road.
So an 80 F100 with a 5 speed trany?
Grille is also not for the truck.
Wonder what parts can with it? be nice to get any motor(s) and all tranys.
Hood & tail lights would be good too.
Dave ----
So an 80 F100 with a 5 speed trany?
Grille is also not for the truck.
Wonder what parts can with it? be nice to get any motor(s) and all tranys.
Hood & tail lights would be good too.
Dave ----
Just had my car trailer inspected and it's empty.
FTE Legend
Joined: Nov 2015
Posts: 30,966
Likes: 4,130
From: Angier, NC
Lol hell Im looking at the bed and the bench seat. the $60 bench seat I found on ebay in Indiana they quoted me a freight charge of $150. Sorry not going to pay over $200 on a worn out seat that needs to at the very least be recovered and needs god knows what mechanical parts to be replaced to be functional.
The plus was the duel tank parts and the ribbed bed floor
Man you are poking the bear
If I came home with that I may have to sleep in my garage. Not that is bad but no heat or AC (its getting hot here) and no bath room that could be a problem.
3 or 4 months ago there was a flare in state about 2 hours away that needed a nose, I have the parts, and I should have gone for it.
Dave ----
Lead Driver
Joined: Apr 2007
Posts: 5,958
Likes: 105
From: Houston
I bought a $400 roll over parts truck for the needed parts inside. Did not get the doors or the panels but mine look to be in pretty good shape but someone painted them. One day I am going to try the old brake fluid on them to see if it will remove the paint and not hurt the panels.
The plus was the duel tank parts and the ribbed bed floor
Man you are poking the bear
If I came home with that I may have to sleep in my garage. Not that is bad but no heat or AC (its getting hot here) and no bath room that could be a problem.
3 or 4 months ago there was a flare in state about 2 hours away that needed a nose, I have the parts, and I should have gone for it.
Dave ----
The plus was the duel tank parts and the ribbed bed floor
Man you are poking the bear
If I came home with that I may have to sleep in my garage. Not that is bad but no heat or AC (its getting hot here) and no bath room that could be a problem.
3 or 4 months ago there was a flare in state about 2 hours away that needed a nose, I have the parts, and I should have gone for it.
Dave ----
Aside from that we do have two at work but one we put a new reman atk 351w engine in even though its a pos, the other is a pos that has been sitting for years that the boss doesn't want to even mess with cause of how old the truck is and how hard it is to find parts. If that truck was ever to get scrapped I have to check it out and verify but I think it has a plain old bench seat which I would gladly ****** out of it if it was going to scrap.
I found a place online that sells full hide leather, a full hide of dark blue leather is $250 and it says to be warned this is real leather so it might have scars on the hide, bug bites, stretch marks, brands, etc. I have been rolling around in my head to see if they can pick me out a hide in dark blue that has a good brand on it. Kinda think it would look cool on a factory bench seat to have a brand mark on the seat. I guess if not I guess I could always brand the hide myself but then that begs the question if it will have to be redyed then.
FTE Legend
Joined: Sep 2003
Posts: 54,081
Likes: 2,440
From: NY and VA
FTE Legend
Joined: Nov 2015
Posts: 30,966
Likes: 4,130
From: Angier, NC
Thanks but the only window I have in my garage is in the room where my shelves are with tools, parts, supplies and the needed ice box to keep drink cold and if you need to reheat your hot drink the micro wave.
I don't want to cut holes in the 2 remaining walls for wall AC's. I also have stuff stored on the walls.
I just picked up I think it's a 3' drum fan from a land fill I was at. After checking it out I found the plug was bad. It will be added to the 3 - 24" box fans I have.
When I or the wife hits Lottery I will insulate, heat & AC the garage.
Dave ----
I don't want to cut holes in the 2 remaining walls for wall AC's. I also have stuff stored on the walls.
I just picked up I think it's a 3' drum fan from a land fill I was at. After checking it out I found the plug was bad. It will be added to the 3 - 24" box fans I have.
When I or the wife hits Lottery I will insulate, heat & AC the garage.
Dave ----
Thread
Thread Starter
Forum
Replies
Last Post
sdiesel
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
0
Dec 3, 2017 11:43 PM