I am confused as to which settings to use for both PSI boost and the other boost. I did a print out years ago when first setup gauge, but now the boost is not reading. These are the settings I have.
Boost: TXD: 686AF1010B RXF: 0441850B0000 RXD: 2808 MTH: 00910064FF88 NAME:BST

PSI BOOST: TXD: 07E0221440 RXF: 046285140640 RXD: 3010 MTH: 012203200000 NAME:PSI

 

The PSI boost is reading with the above settings post, the input for the BST does nothing, is that normal ?