Dead HPOP
Thread Starter
|
Senior User
Joined: Mar 2010
Posts: 153
Likes: 0
From: Kearns, UT
The funnest part of this project yet.. .. The two little bolts that hold the heat shield to the back of the HPOP cover. My fat hands and fingers barely fit around the up pipes. Any tricks or tips for putting those two bolts back in? ~Thanks!
Fleet Owner
Joined: Apr 2012
Posts: 27,307
Likes: 549
From: Spanaway
Bad joke time.
Take a run down to the red light district and find some tiny hooker
and tell her where you want he to put her hands. Just don't say any
thing about price or nuts and bolts just in case she is a vice officer.
But really any kids live near by that have a dad that will come over.
And turn your ...
Take a run down to the red light district and find some tiny hooker
and tell her where you want he to put her hands. Just don't say any
thing about price or nuts and bolts just in case she is a vice officer.
But really any kids live near by that have a dad that will come over.
And turn your ...
Thread Starter
|
Senior User
Joined: Mar 2010
Posts: 153
Likes: 0
From: Kearns, UT
Bad joke time.
Take a run down to the red light district and find some tiny hooker
and tell her where you want he to put her hands. Just don't say any
thing about price or nuts and bolts just in case she is a vice officer.
But really any kids live near by that have a dad that will come over.
And turn your ...
Take a run down to the red light district and find some tiny hooker
and tell her where you want he to put her hands. Just don't say any
thing about price or nuts and bolts just in case she is a vice officer.
But really any kids live near by that have a dad that will come over.
And turn your ...
I stuck both the short and long 8mm socket on a rare earth magnet for a good long while and was able to magnetize the sockets enough I got the bolts back in without dropping them.
Thread
Thread Starter
Forum
Replies
Last Post
f150crewcab
6.0L Power Stroke Diesel
9
Mar 6, 2015 03:15 PM
Benchwrench
6.0L Power Stroke Diesel
23
Aug 8, 2010 09:49 AM
