Just wondering how to lower my 50 ford pickup about 3 inches i seen that speedway had springs that would lower it any suggestions would be great thanks Barry

 

Edit--Barry's post is now in the proper forum...thanks to the Moderator(s) for moving it here.

Barry, it is usually helpful to state the post topic in its title. Instead of "some help" use a title like "need help lowering a 1950 Ford pickup"

Thanks,
George

 

 

I went with a 8.8 rear axle and remounted the spring mounts. And Posies super slide 2 leaf springs on the front it lowered my 50 by about 3"

 

While I would agree with you that we shoudn't be discussing 2020 Broncos here, this owner is asking about a '50.

Later!
Mr. Ed

 

This is not worth a lot of explanation but this post was originally made on the 2020 Bronco forum and moderators have moved it here. The issue is that the 2020 Bronco forum was not a good place for a discussion on a '50 Ford pickup, with a post entitled "Some Help".... It's all good now.

 

SORRY(new at posting ) Love to have a 2020 Bronco but wouldn't trade my 50 for it

 

I used an MII front crossmember with standard spindles and 2001 Explorer rear, Nissan Pathfinder rear leafs, under axle. I have 4-5 inches of drop.

Stock height with suspension upgrades would have been my preference.