How to fix an overactive beeper when in reverse?
Thread Starter
|
5th Wheeling
Joined: Jun 2018
Posts: 38
Likes: 0
How to fix an overactive beeper when in reverse?
I have a 2012 F250 and it used to work properly when I was in reverse, it would only beep fast when I was close to an object. Now it goes crazy the moment I get into reverse half the time.
Any idea what's causing this?
Thanks
Any idea what's causing this?
Thanks
Fleet Mechanic
Joined: Jan 2012
Posts: 1,841
Likes: 6
Most likely a bad sensor or sensors there are codes associated with which sensor is bad but other than Ford’s ids which is their diag computer program I’m not aware of any other code reader that can read those codes. If you haven’t already try cleaning all the sensors and see if it helps mine freak out if they are dirty like after driving in the rain I can wipe them off and they are ok though I do have one that is scratched and I think that makes it gets a bit weird from time to time. You can also put the truck in reverse with out it running and the parking brake set (you don’t want to run over yourself there is a good story on here about a guy doing that btw) and see if you can hear one that is not clicking when you put your ear up to it. If one isn’t that’s your culprit.
Thread
Thread Starter
Forum
Replies
Last Post
