110V outlet issue

Reply Subscribe

Thread Tools

Search this Thread

Jun 14, 2018 | 12:17 PM

Chris Greene

Thread Starter

New User

Joined: May 2018

Posts: 11

Likes: 0

110V outlet issue

I tried using the outlet to charge my Ryobi 18V battery. It immediately causes a fault. The charger only pulls 85W. In manual it specifically states that’s what The outlet can be used for. Anything I need to do for it to work?

Jun 14, 2018 | 12:35 PM

wildcard30

Posting Guru

Joined: May 2003

Posts: 1,666

Likes: 4

From: Sunny tourist infested FL

Search your issue. There are a couple of threads. Some chargers don’t like the power from the outlet. It not a true sync wave, it’s a modified square wave. See post 15.

https://www.ford-trucks.com/forums/1536972-110v-outlet-measures-85v-volts-2.html#post17937233

Jun 14, 2018 | 01:26 PM

natpark

Mountain Pass

Joined: Jan 2017

Posts: 122

Likes: 8

I have the same issue. One charger works the other one blow it out. Both pull low loads well below the rates output . Just the way it is. I guess you could replace the inverter with a different unit if you are so inclined.