Distributer swap
Thread Starter
|
Junior User
Joined: Apr 2017
Posts: 58
Likes: 0
Distributer swap
ive got a 1981 f150 with a 351w the previous owner swapped from Electric ignition to points leaving the ignition box and original starter silonoid on the right fender. My question is how would I go about swapping tonHEI and what buget-ish distributer will work with a stealth intake? Thanks
Mountain Pass
Joined: Apr 2018
Posts: 101
Likes: 4
I think the HEI systems just use one wire hook up..I had an HEI in my 351w with a Stealth intake..
The problem is in the air cleaner clearance to the HEI, Those things are big! Not sure what brand I had,
there was no markings on it...Why not go to the Ford Dura Spark system, if your ignition box is still there?
The problem is in the air cleaner clearance to the HEI, Those things are big! Not sure what brand I had,
there was no markings on it...Why not go to the Ford Dura Spark system, if your ignition box is still there?
Moderator
Joined: Jan 2001
Posts: 57,025
Likes: 2,758
From: Virginia
If he has a box on the fender, then he probably does have the remnants of the duraspark system, he is just calling it the wrong thing. But a picture of the box on the fender would verify that.
Thread
Thread Starter
Forum
Replies
Last Post
