When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not saying the lights thing isn't an issue, but after watching a video on youtube my understanding is that the light on the remote turns green if the truck successfully remote starts.
This is if you have the bidirectional fob, which is an option over & above the standard fob. Standard fob has no indicator lights.
I added the antenna & bidirectional fob after installing VSS & RMU for cell phone operation.
I know this is kinda old but did want to follow up. I ended up bringing it back to the dealer that installed it and they said it was a programing thing and got it working. So the parking light now turn on with the truck.
My running lights/dash work when I use remote starter but stop when I turn the key
Hello everyone. I've been having a terrible time trying to figure out this issue. My running lights front end rear and - lights. Do not work when the car is on but if I use the remote start. They work until I turn the key and press the brake period So something is obviously causing them to not work. When the key is turned and the brake pedal is engaged period I recently had a plow harness installed new headlights and rivers lights installed. They stopped working when I was installing new plow turn signal lights. After I put in the new plow, turn signal lights. One of them was dim. So I used a tester to test the light and that's when all of the running/dash lights on the truck went off. Now when the plow is off this is what happens... I thought it was a relay on the plow harness so I swapped them all with new ones, and no change. I'm at a loss please help.....?