Lighted running board question
Thread Starter
|
Fleet Mechanic
Joined: Nov 2015
Posts: 1,670
Likes: 668
From: DeMotte, IN
Lighted running board question
I added lights under my running boards that are currently wired to a switch panel I added in the bed that control several lights I added. I have the factory wiring to tie those lights into so they go on when I open the doors and the aftermarket plugs to use. There is a factory plug on each side of the truck. My question is do I need to tie in to both factory plugs? If I only tie into the plug on the driver side, will the passengers door still activate the lights? Both running board lights are one one circuit. Thanks
Elder User
Joined: Oct 2014
Posts: 607
Likes: 3
From: CT
Whenever the interior lights come on, both running board light sockets are energized.
They will come on regardless of which door is opened, if the dome lights are turned on via the dashboard switch, or when you unlock the vehicle with the remote keyfob.
They will come on regardless of which door is opened, if the dome lights are turned on via the dashboard switch, or when you unlock the vehicle with the remote keyfob.
Thread
Thread Starter
Forum
Replies
Last Post
tooldad1041
1999 - 2016 Super Duty
17
Dec 12, 2014 05:40 AM
