When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I used the rough country poly something spacers like $49. I installed it myself once I got one side disassembled the other side went a lot quicker trying leave all I could attached and getting all that figured out. I ended up using a 3 ton and two small 2ton jacks jack stands and ratcheting box wrenches are a live saver working on these trucks suspension but if you have any knowledge of it go ahead but do not DO NOT hit the knuckle or anything without unplugging the power steering sensor plug any strike to it with it plugged in will set off the system and your warranty won’t cover it luckily I did mine a week after I took delivery so I didn’t need a hammer don’t know your vehicle condition but I’d just avoid using a hammer period
I used the rough country poly something spacers like $49. I installed it myself once I got one side disassembled the other side went a lot quicker trying leave all I could attached and getting all that figured out. I ended up using a 3 ton and two small 2ton jacks jack stands and ratcheting box wrenches are a live saver working on these trucks suspension but if you have any knowledge of it go ahead but do not DO NOT hit the knuckle or anything without unplugging the power steering sensor plug any strike to it with it plugged in will set off the system and your warranty won’t cover it luckily I did mine a week after I took delivery so I didn’t need a hammer don’t know your vehicle condition but I’d just avoid using a hammer period
Sounds more involved than i want lol...i will probably have someone else do the install.
Thanks bud!