December 2017 Chat Thread
Thread Starter
|
FTE Chapter Leader
Joined: Aug 2011
Posts: 4,321
Likes: 13
From: Cave Spring Georgia
There is still snow on the ground from my house all the way to Austell, mainly in the shady areas now. Snow is cool for a day or two but that's about it for me, I like the little dusting we get most of the time. Decided to take Friday off and head down to Florida since there is a chance of rain on Sunday.
Postmaster
Joined: Oct 2014
Posts: 3,914
Likes: 9
From: Thomaston
I talked to guy in MN last week they had no snow o. The ground. We just got snow shower but did not stick.
Less than 2 weeks till Christmas.
Why dont you talk your boss in to letting you do 4 ten, then you could have every Friday off
Less than 2 weeks till Christmas.
Why dont you talk your boss in to letting you do 4 ten, then you could have every Friday off
Senior User
Joined: Apr 2015
Posts: 406
Likes: 0
From: Macon,GA
Howdy folks, we didn't get any snow in middle GA, but it sure is cold. This weather is making the truck hard to start and idle. I have to rev it at 1500 or the truck will die. This carb tuning is definitely a learning curve. Does anyone have any suggestions
Senior User
Joined: Apr 2015
Posts: 406
Likes: 0
From: Macon,GA
I think my plugs at fouled because it's.running to rich and it will not get spark. The carb is less then a.year old. What adjustments should I make to keep it from.doing it again.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Thread Starter
|
FTE Chapter Leader
Joined: Aug 2011
Posts: 4,321
Likes: 13
From: Cave Spring Georgia
I am back home again. I sure do miss the central Florida weather in the winter time. The low was 67 and the high was 78. My step mom gave me a ton of stuff and pictures. Some of the coolest is my great great grandfathers pocket watch and the ring my father has worn for over 50 years.
She also gave me a 1962 Wheelhorse 552 lawn tractor that my father picked up from somewhere. After researching them online I have to say it seems to be 99% original and other than the carburetor being taken off and needing rebuilt it is pretty good shape. I will probibly never mow grass with it but it will be cool to get it running again.
I asked her about my grandfathers Allis-Chalmers tractor again. I didn't get a yes but I didn't get a flat out no either. She said the main problem is that it is apart getting powder coated. I told her I would pay my step brother for the powder coating and putting it back together. I guess we wait and see how it ends.
She also gave me a 1962 Wheelhorse 552 lawn tractor that my father picked up from somewhere. After researching them online I have to say it seems to be 99% original and other than the carburetor being taken off and needing rebuilt it is pretty good shape. I will probibly never mow grass with it but it will be cool to get it running again.
I asked her about my grandfathers Allis-Chalmers tractor again. I didn't get a yes but I didn't get a flat out no either. She said the main problem is that it is apart getting powder coated. I told her I would pay my step brother for the powder coating and putting it back together. I guess we wait and see how it ends.
Thread Starter
|
FTE Chapter Leader
Joined: Aug 2011
Posts: 4,321
Likes: 13
From: Cave Spring Georgia
Alex,
It would replace the plugs, Once you get it running again first thing to check is the timing. Get a vacuum gauge and then adjust the needles by the gauge after it has warmed up. You can do it my ear but I prefer a gauge. If you need a starting point for the needles about 3 1/2 turns out should get it running. Then mess with the choke.
It would replace the plugs, Once you get it running again first thing to check is the timing. Get a vacuum gauge and then adjust the needles by the gauge after it has warmed up. You can do it my ear but I prefer a gauge. If you need a starting point for the needles about 3 1/2 turns out should get it running. Then mess with the choke.
Thread Starter
|
FTE Chapter Leader
Joined: Aug 2011
Posts: 4,321
Likes: 13
From: Cave Spring Georgia
I will the wheelhorse running again and my son can ride around on it in the yard in a few years. It looks like a big tractor only a lot smaller.
Thread Starter
|
FTE Chapter Leader
Joined: Aug 2011
Posts: 4,321
Likes: 13
From: Cave Spring Georgia
I already found them and became a member. Told them what I had and they posted a ton of info on that model tractor for me to download. Working overtime all week since we have a company meeting on Friday morning and then they let us off the rest of the day.