HVAC behavior
Thread Starter
|
Cargo Master
Joined: Aug 2002
Posts: 2,117
Likes: 8
From: Over Yonder, MN
HVAC behavior
So I've noticed that frequently my HVAC won't 'save' what the current settings are through an ignition cycle, I'm not sure how to explain this...
1. AC on set to 70* (been that way for several drive cycles)
2. Turn AC off
3. Shut off truck
4. Restart truck, AC comes back on to 70
5. Turn AC back off
6. Shut truck off
7. Restart truck, ac will be off
8. Turn AC back on
9. Shut truck off
10 Restart - Ac will be off
It's like I have to change the setting twice for it to stick. Anyone else notice this behavior? It's the same for the heated/cooled seats as well.
1. AC on set to 70* (been that way for several drive cycles)
2. Turn AC off
3. Shut off truck
4. Restart truck, AC comes back on to 70
5. Turn AC back off
6. Shut truck off
7. Restart truck, ac will be off
8. Turn AC back on
9. Shut truck off
10 Restart - Ac will be off
It's like I have to change the setting twice for it to stick. Anyone else notice this behavior? It's the same for the heated/cooled seats as well.
Thread
Thread Starter
Forum
Replies
Last Post
FordPickMeUp
Cooling, Heating, Ventilation & A/C
2
May 25, 2022 02:32 PM
bnovak
1997 - 2006 Expedition & Navigator
6
Aug 1, 2009 10:54 AM
galaxie223
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
9
Jul 31, 2003 09:20 PM
