Turn signals not working
Thread Starter
|
Mountain Pass
Joined: Sep 2017
Posts: 200
Likes: 0
Turn signals not working
Turn signals not working,right side works while hazards are on but nothing when I just use the signals I can hear the clicker but that's about it.
If you have any advice I will be much appreciated.
If you have any advice I will be much appreciated.
Fleet Mechanic
Joined: Sep 2014
Posts: 1,626
Likes: 78
From: NE Texas
First click on the box at the upper right of the screen that says "Search threads." Type "turn signals not working" in the search box, then in the box to its left tell it to search all. You will get at least ten pages of answers. Basically start with checking bulbs, grounds, sockets, an continuity - good luck.
Thread Starter
|
Mountain Pass
Joined: Sep 2017
Posts: 200
Likes: 0
First click on the box at the upper right of the screen that says "Search threads." Type "turn signals not working" in the search box, then in the box to its left tell it to search all. You will get at least ten pages of answers. Basically start with checking bulbs, grounds, sockets, an continuity - good luck.
Thread
Thread Starter
Forum
Replies
Last Post
ru67
1967 - 1972 F-100 & Larger F-Series Trucks
8
May 28, 2016 12:21 PM
