351 W Clevor
Thread Starter
|
Senior User
Joined: Jan 2005
Posts: 422
Likes: 2
From: S.C. North Dakota
351 W Clevor
Any one mess with putting on 400 cu in cylinder heads on a 351 Windsor block ? I have a bone stock 1974 gran torino 351W engine . The
heads are canted valve type from a ranchero of the same year . Probably have the taller deck block so the compression was lowered to think of . Just an project idea I been trying to find info on .
heads are canted valve type from a ranchero of the same year . Probably have the taller deck block so the compression was lowered to think of . Just an project idea I been trying to find info on .
Thread Starter
|
Senior User
Joined: Jan 2005
Posts: 422
Likes: 2
From: S.C. North Dakota
No the 1974 Windsor is bone stock never been apart .( Windsor heads ) BUT I have this set of reconditioned cylinder heads from a 1974 ranchero and their the canted valve style head . There in lies my idea of the clevor build with what I have available
Thread
Thread Starter
Forum
Replies
Last Post
Huntersbo
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
4
Sep 10, 2005 07:27 PM
shawnlee28
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
2
Jul 12, 2004 12:30 AM
