delete this please
Hotshot
Joined: Nov 2006
Posts: 11,288
Likes: 269
From: North of Greenville
I've done the same thing myself before, but you gotta know that a thread title like that cannot help but demand attention from the rest of us -- especially with your username being what it is! Worst case scenario... make up something new for a conversation if you really don't want to offer up the original details.
Thread Starter
|
Fleet Mechanic
Joined: Apr 2015
Posts: 1,264
Likes: 7
"alright alright alright, id be a lot kooler if I did!"
perhaps I should start all my threads like this for attention LMAO!
I was putting head studs in an IDI block yesterday and the studs were too long.
the top of the studs hit the rocker assemblies.
well I pulled a set off the shelf from my last IDI catastrophic failure,
and the new studs were a 1/2" longer.
I was asking if these were powerstroke studs.
but in my infinite IDIocracy, I realized that not only PSD bolts were metric, they also came in different lengths.
ive done one PSD head swap 5 years ago and I couldn't remember, until I went to a buddys house and checked out his PSD on the stand.
hence SNAFU & FUBAR lol
perhaps I should start all my threads like this for attention LMAO!
I was putting head studs in an IDI block yesterday and the studs were too long.
the top of the studs hit the rocker assemblies.
well I pulled a set off the shelf from my last IDI catastrophic failure,
and the new studs were a 1/2" longer.
I was asking if these were powerstroke studs.
but in my infinite IDIocracy, I realized that not only PSD bolts were metric, they also came in different lengths.
ive done one PSD head swap 5 years ago and I couldn't remember, until I went to a buddys house and checked out his PSD on the stand.
hence SNAFU & FUBAR lol
Trending Topics
Post Fiend
Joined: Apr 2017
Posts: 6,437
Likes: 5
From: Oklahoma
i completely installed the left upper control arm for my ranger on the right side lol. even had the tire back on and sitting on the ground hahaha! halfway through the left side, i realized what i had done :doh:
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
Lead Driver
Joined: Dec 2006
Posts: 7,093
Likes: 147
From: San Diego, CA
I installed the front hub bearing without the brake dust shield...twice...on the same project. Lesson learned: don't get distracted when doing work, especially re-work!
We're well on the way to passing up the Gas vs. PSD thread. Only 337 pages to go!
We're well on the way to passing up the Gas vs. PSD thread. Only 337 pages to go!
Fleet Mechanic
Joined: Jan 2014
Posts: 1,506
Likes: 73
From: Staunton, VA
Had someone come in one day saying they wanted their oil checked as they just got it changed but it sounded weird. Coworker put two quarts in as the stick showed nothing, and then I noticed a huge wet spot in the parking lot.
Yep, the people that did the oil change either didn't tighten it up or forgot to put it in there and she drove a good five to ten miles like that.
Needless to say someone had a spun bearing or two.
Yep, the people that did the oil change either didn't tighten it up or forgot to put it in there and she drove a good five to ten miles like that.
Needless to say someone had a spun bearing or two.
Tuned
Joined: Feb 2015
Posts: 434
Likes: 18
From: Phoenix Area
When I was working at a paving company as a technician I forgot to spin a filter on tight, started to truck..lets just say who new that 6 gallons of 1540 could cover so much floor when spilled and the filter falls off...
Fleet Mechanic
Joined: Jan 2014
Posts: 1,506
Likes: 73
From: Staunton, VA
She came in and said it was running and sounding funny, was lacking power too. Couldn't understand why as she just got an oil change done. I kind of wanted to laugh but also felt bad that they ruined her daily. The only other thing she has to drive is her old Corvette (which she doesn't like driving, I might add).