Just a simple request to see pics of truck with a leveling kit and 295's. I am considering going this route over 37's but I wanna see if the tires look appropriate for the kit. Thanks!

 

What kit are you thinking about using to level? I was looking at BDS 2" kit. I am going to go with 285/75r18 tires as I am keeping my stock rims.

 

I am running that exact set up. I put the 295's on a 10 inch wide rim and they look great.

I have my bushwacker flares being color matched right now and I will pick them up in the morning.

I should have it all installed tomorrow and I will post an updated pic.

37s on a 10 inch wide wheel and my offset would definitely rub without some trimming.

 

Here you go, I need more piks as I've posted these ones a few times:

296/65/20 on 20x10 -13 2" BDS level with foxes

 

Wow, CopperCore, that looks great! I bet it would look even taller/meaner if you had the electronic drop down steps which would give the illusion of more height/clearance. I'll admit that I am torn on whether or not to go with a 9" or 10" wide wheel. I have always been a fan of the taller and leaner look which is why I am leaning towards 20x9's.

What are your thoughts on that BDS level kit? How's the ride compared to stock? Thanks again for posting the pics.

 

I did not get my flares installed today. I tried, but had issues with getting some of the mounting holes matched up.

Here is a pic though.



This is a 2.5 inch procomp leveling kit. Fox 2.0 shocks.

20 x 10 inch wheels, and they do not rub anywhere with -19 back spacing.

 

Looks awesome Shaneinga!

 

I went with a tighter offset on wheels, See sig for details

 

Do you have a pic from the front looking down the side of the truck?
Thanks

 

Ditto, I'd like to see the same!

 

I have a 2inch bds with the foxes and a drop track bar bracket ready lift brand new in box for $500.00 In Atl. might ship. Went another direction on lifting.

 

Email and PM sent.

 

I have a readylift 2.5" with track bar relocation bracket still new in box for 430 in Texas. I too decided to go a different route.

 

Carli

2.5 lift with stock wheels 325-65-20's, slight rub on driver side on full lock turn