302 v8 engine Purchs
FTE Legend
Joined: Nov 2015
Posts: 30,886
Likes: 4,119
From: Angier, NC
The six are bolted in looking from top down
Now I was trying to see if the cross members are the same between us and yours but is hard to tell.
Looks like if the six mounts are removed the cut out is there for the oil filter.
Also looks like the mounts you posted would fit behind the cross member closer to the cab and from what I remember posted that is right for ours too.
front looking back to cab
Dave ----
Now I was trying to see if the cross members are the same between us and yours but is hard to tell.
Looks like if the six mounts are removed the cut out is there for the oil filter.
Also looks like the mounts you posted would fit behind the cross member closer to the cab and from what I remember posted that is right for ours too.
front looking back to cab
Dave ----
Thread Starter
|
Senior User
Joined: Sep 2014
Posts: 353
Likes: 0
Thanks Dave it looks like they should fit behind the cross member is you said. Yes - Ford Australia did just put sections in each side of the fire wall - unfortunately those sections rusted out very early in their life due to the cutting and welding which was done. We used (as far as I know) our Falcon steering wheel/column and a bigger brake booster and also a Falcon master cylinder for the manual trucks.
Thread
Thread Starter
Forum
Replies
Last Post
neelyjosh
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
0
Jun 15, 2017 07:37 PM
dusterfanatic
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
4
Oct 1, 2012 12:00 PM
